Cryogenic Spares » Laboratory Essentials » Supplies

Supplies

ICEoxford® sells various items and supplies for the cryogenics laboratory.

Vacuum Grease

Overview

A general purpose grease that may be used to lubricate and seal o-rings. It has range of -40°C to 200°C.

It is inert to oxidation and is resistent to a wide range of corrosive chemicals and aquaeous analytical reagents.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles01£10.00

Apiezon N Grease

Overview

Apiezon N Grease is a high vacuum grease. Used for making thermal contact between sensors and cold surfaces.

Vapour pressure:
<10-9 mbar at 20°C
Melting point: 43°C.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles02£145.00

Low Temperature Varnish

Overview

For securing or thermally anchoring electrical wires to solid surfaces. It has excellent bonding properties and good electrical and chemical resistance. In addition it has excellent resistance to thermal cycling.

Please note that shipping restrictions may apply, consistent with local hazardous chemical requirements.

 

Data
Thermally conductivity between 4K and 10K: 3.2 x 10-5 Watts/cm K
Air drying time: 15mins
30 ml pot

 


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles03 £19.00

Sensor and Heater Cement

Overview

An air curing cement for potting and protecting temperature sensors and heaters.

Data
Temperature range 1.5K to 1500°C
Electrically insulating
Odourless
500gram pot

More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles04£29.50

Cyanoacrylate Glue

Overview

An industrial fast curing solvent-free adhesive which rapidly bonds rubber, in particular, non-standard o-rings.


More information: 01993 706 444

Available in the following

 PriceQtyBasket
£POA

Multi-Purpose Epoxy Resin Adhesive

Overview

A multi-purpose epoxy resin adhesive used for bonding plastics, glass, metals, ceramics and sealing porous surfaces. Used for mounting all types of windows except KRS5 and Mylar. Long working life.

Supplied in 2 x 140 gram tubes.

 

Please note: shipping restrictions may apply, consistent with local hazardous chemical requirements.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles46£78.50

Epoxy Resin Adhesive Suitable for Cold Windows

Overview

A flexible epoxy resin suitable for materials with different coefficients of exspansion. Will bond KRS-5, Mylar and Aluminised Mylar windows.

Supplied in 1 x 50 gram adhesive and 1 x 25 gram of Hardener

 

Please note: shipping restrictions may apply, consistent with local hazardous chemical requirements.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles47£54.00

Stycast 2850FT Epoxy

Overview

An epoxy resin with a silica binder, with thermal expansion matched to copper. Excellent thermal cycling properties at cryogenic temperatures. Order catalyst separately.

Supplied in 32 oz container.

 

Please note: shipping restrictions may apply, consistent with local hazardous chemical requirements.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles06£198.80

Stycast 2850GT Epoxy

Overview

An epoxy resin with thermal expansion matched to brass. Order catalyst separately. Excellent thermal cycling properties at cryogenic temperatures 

Supplied in 1 Gallon container.

 

Please note: shipping restrictions may apply, consistent with local hazardous chemical requirements.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles07£285.00

Stycast Catalyst #23LV

Overview

Low-viscosity catalyst for curing Stycast epoxy resins. Mix 7.5 parts catalyst to 100 parts epoxy for cure. Cures in 2-4 hours at 65°C, 24 hours at room temperature.

Can be used with either resins above.

 

Please note: shipping restrictions may apply, consistent with local hazardous chemical requirements.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles08£116.50

Stycast Catalyst #11

Overview

Low-viscosity catalyst for curing Stycast epoxy resins. Mix 4.5 parts catalyst to 100 parts epoxy for cure. Cures in 2-4 hours at 65°C, 24 hours at room temperature.

Can be used with either resins above.

 

Please note: shipping restrictions may apply, consistent with local hazardous chemical requirements.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles09£78.50

Indium Wire

Overview

For securing liquid helium seals. Other diameters on request. Price per metre, 6 metres minimum.

Also available in sheet form


More information: 01993 706 444

Available in the following

DiameterCodePriceQtyBasket
1.0mmICEles10£19.00
1.5mmICEles11£71.00
1.7mmICEles48£POA
1.9mmICEles49£58.00

Vacuum Compound (Q Compound)

Overview

Temporary solution for sealing laboratory vacuum work. It has a good adhesion in service and is re-usable. Available in 1 kg tins.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles13£247.00

Aluminium Tape

Overview

A self adhesive tape for joining superinsulation or aluminised Mylar. Also useful for covering unwanted radiation paths in low temperature equipment. Reel length 50m.


More information: 01993 706 444

Available in the following

DiameterCodePriceQtyBasket
19mmICEles14£17.75
50mmICEles15£49.50

Kapton Tape

Overview

A self-adhesive insulating tape for high and low temperature applications. Excellent electrical isolation and physical properties. Reel length 50m.


More information: 01993 706 444

Available in the following

DiameterCodePriceQtyBasket
12.5mmICEles16£17.50
25mmICEles17£30.00

Nylon Line

Overview

A monofilament line used to secure items to cryogenic equipment at cryogenic temperatures. Supplied on a 100m reel.


More information: 01993 706 444

Available in the following

DiameterCodePriceQtyBasket
.22mmICEles18£8.50
.27mmICEles19£8.50
.35mmICEles20£15.00

Aluminised Mylar Tape (19mm wide)

Overview

A self adhesive tape for joining superinsulation or aluminised Mylar. Reel length 55m.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles21£31.00

PTFE Tape 12mm Wide

Overview

An elastic tape suitable for sealing and securing wiring and thermometry in low temperature applications. Reel length 12m.


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles22£3.00

Acetate Tape

Overview

A self-adhesive tape for wrapping liquid helium displacement material, withstands low temperatures. Reel length 55m. Contact sales regarding displacement materials and sizes.


More information: 01993 706 444

Available in the following

WidthCodePriceQtyBasket
19mmICEles23£31.75
25mmICEles24£35.00

O-Rings

Overview

ICEoxford can supply a comprehensive range of sizes of Nitrile and Viton o-rings.

This table is an example of some of the wide range of sections and sizes available, just ask for your requirement

Section diameter Size ranges
0.070" 0.078" - 1.375"
0.103" 0.375"  - 2.812"
0.139" 0.750"  - 10.00"
0.210" 1.500"  - 4.500"
0.275" 4.500"  - 15.50"

More information: 01993 706 444

Available in the following

CodePriceQtyBasket
X£POA

Multicore Solder

Overview

A general purpose, flex-cored solder which is fpr electrical electronics applications. Available in 500 gram reels.

Data
Bonding temperature: 225°C
Electrical conductivity: 16% IACS

More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles30£17.00

Soft Solder 1.5mm Dia.

Overview

A silver bearing alloy providing good strength for use on stainless steel, mild and low alloy steels and its alloys. This solder is free from cadmium, zinc, and lead. For best results use ICEles32 flux. Reel length 6m


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles31£19.00

Silver Solder 1802 Flux

Overview

Recommended for use with hard solder. Available in 1kg plastic pot. Working temperature range: 450°C to 900°C


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles36£85.00

Silver Solder Stick

Overview

Tensile strength:300-400 N/mm² Melting temperature: 660°C Bonding temperature: 590°C

Data
Tensile strength:300-400 N/mm²
Melting temperature: 660°C
Bonding temperature: 590°C

More information: 01993 706 444

Available in the following

CodePriceQtyBasket
1.0mmICEles33£7.00
1.5mmICEles34£7.00
2.4mmICEles35£7.00

CAFF Paste

Overview

CAFF paste for making low temperature cone seals


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles61£20.00

Woods Metal

Overview

A low temperature solder that is ideal for leak tight joints, repeated thermal cycling and enabling readily demountable joints. Allows solder joints to be made adjacent to soft soldered joints. Available per 200 gram lots.

Data
Melting point: 65 - 70°C
Stronger than lead solder at 4.2K
Potentially hazardous - COSHH sheet supplied
Approximately half the tensile strength of lead-tin solder

 

When ordering 2 or more of these products priced each £75.65


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles29£89.00

Soft Solder 157 Flux

Overview

Recommended for use with soft solder ICEles31. Available in 1kg plastic pot. Working temperature range: 150°C to 375°C


More information: 01993 706 444

Available in the following

CodePriceQtyBasket
ICEles32£85.00