Cryogenic Spares » Thermometry » Ruthenium Oxide Sensor

Ruthenium Oxide Sensor

Ruthenium Oxide Sensor - Temperature Range 50mK - 4.2 K

Ruthenium Oxide Sensor

The thick film RuO2 chip sensor has been mounted in a gold-plated bobbin. The bobbin is designed for optimum thermal contact between the sensor and object being measured whilst minimising mechanical strain on the sensor that can alter calibration after thermal cycling. The sensor is self contained, terminating in a miniature connector. A flying lead is supplied with the mating part of the connector.

Temperature Range

The range of calibration (both types) is 25 mK - 4.2 K.

Calibration guaranteed from 50 mK upwards, but below 50 mK will require secondary thermometry i.e. nuclear orientation equipment.

RuO2 sensors are available as a 30 point calibration (ICErus01) and a generic version (ICErus02). The generic sensor is thermally cycled and tested for reproducibility, using a generic curve, with the 30 point calibrated sensor.

30 Point Calibrated Sensor

Overview

RuO2 sensors are available as a 30 point calibration (ICErus01) and a generic version (ICErus02). The generic sensor is thermally cycled and tested for reproducibility, using a generic curve, with a 30 point calibrated sensor.


More information: 01993 706 444

Available in the following

DescriptionCodePriceQtyBasket
30 Point Calibrated SensorICErus01£2190.00

Generic Sensor

Overview

RuO2 chip with mount and generic curve


More information: 01993 706 444

Available in the following

DescriptionCodePriceQtyBasket
Generic SensorICErus02£258.00